低速冲击下玻璃钢/钢复合结构损伤特性实验研究

考虑基体材料的不同增韧特性,针对两种不同的玻纤织物增强复合材料/钢复合结构进行低速冲击实验,采用超声波探伤仪对玻璃钢损伤区域进行了探测.结果表明,采用增韧基体的玻璃钢/钢复合结构在低速冲击下玻璃钢层的抗冲击能力更强,相同能量冲击下的损伤面积更小;损伤面积近似呈正方形分布,正方形对角线与纤维方向一致.     

电子干扰对防空兵群射击指挥效率的影响评估

针对防空作战中电子对抗异常激烈的现实,利用概率论和作战运筹方法,描述了电子干扰对防空兵群射击指挥效率影响的主要特点和评估指标,分析了射击指挥方式与群抗击效率之间的数学关系,建立了搜索雷达、通信系统和火控雷达受到电子干扰时群射击指挥效率的评估模型.结合实例计算,得到了电子干扰对群射击指挥效率影响的基本规律,提出了电子干扰时选择射击指挥方式的原则与方法.     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

铁基非晶纳米晶涂层的耐磨性研究

采用基于机器人的自动化高速电弧喷涂技术在45钢基体上制备了FeCrBSiMnNbY非晶纳米晶涂层。研究了非晶纳米晶涂层在油润滑条件下，不同磨损时间、速度、载荷对涂层的磨损行为。采用扫描电镜（SEM）、能谱分析仪（EDAX）和X射线衍射仪（XRD）对涂层的组织结构进行了表征，利用纳米压痕仪对涂层的力学性能进行了分析，摩擦磨损试验在MM200滑块磨损试验机上进行。结果表明：涂层组织均匀，结构致密，主要由非晶相和α-Fe相纳米晶组成；在相同磨损试验条件下，非晶纳米晶涂层的相对耐磨性为3Cr13涂层的4．6倍，磨损机制主要为脆性疲劳剥落。     

Performance study of jute-epoxy composites/sandwiches under normal ballistic impact

This study is undertaken to explore the use of natural fiber Jute-epoxy (JE), Jute-epoxy-rubber (JRE) sandwich composite for ballistic energy absorption. Energy absorbed and residual velocities for these composites are evaluated analytically and through Finite Element Analysis (FEA). FE analysis of JE plates is carried out for different thicknesses (3, 5, 10 and 15 mm). JE plates and JRE sandwiches having the same thickness (15 mm) are fabricated and tested to measure residual velocity and energy absorbed. The analytical results are found to agree well with the results of FE analysis with a maximum error of 9%. The study on JE composite plate reveals that thickness influences the energy absorption. Experimental and FE analysis study showed that JRE sandwiches have better energy absorption than JE plates. Energy absorption of a JRE sandwich is about 71% greater than JE plates. Damages obtained from FEA and testing are in good agreement. SEM analysis confirms composites failed by fiber rupture and fragmentation.     

FeAlCrNbB金属间化合物复合涂层的制备与表征

研究开发了一种FeAlCrNbB新型喷涂粉芯丝材,并结合自动化高速电弧喷涂工艺制备了该材料的复合涂层,分析了涂层的常规力学性能、组织结构和油润滑条件下的滑动摩擦磨损性能,并和常规FeAl涂层进行了对比。结果显示:FeAlCrNbB涂层具有相对较高的显微硬度和拉伸结合强度、低的孔隙率,组织致密,形成了由Fe-Al金属间化合物相、氧化物以及少量非晶和纳米晶组成的复合结构,由于这种复合结构的材料特征,使涂层具备较好的耐磨损性能。